6.3mm Vertical Mount KSD301 Ceramic Bimetal Thermostat 10A 250V 92C For G18 Pipe Clamp

Product Description

6.3mm Vertical Mount KSD301 Ceramic Bimetal Thermostat 10A 250V 92C For G18 Pipe Clamp

Technical requirements Of The KSD301 Ceramic Bimetal Thermostat

1. The product requires CQC, TUV certification
2.10A/250V temperature limit temperature 92 ± 3 degrees power off, 70 ± 5 degrees reset
3. The temperature limit temperature current and voltage certification marks are marked on the aluminum cover of the product
4. Insulation The resistance is not less than 100MOhm
5. The insulating parts withstand 2000V~/1mA/1min; during normal operation, the leakage current is less than or equal to 0.5mA
6. There is no obvious burr on the terminals
7. Under rated load conditions, the action is not less than 30000 times (the cycle is 10 minutes) /time)
8. The terminal can withstand 10kg in the axial direction and 7kg in the radial direction without causing functional problems
9. There should be no obvious burrs on the surface of the parts,and the signs are clearly visible P/N: KSD301-92CP

Description Of The KSD301 Ceramic Bimetal Thermostat

KSD301 series product is a temperature control switch that uses bimetallic sheet as the temperature sensing component. When the electrical appliance is working normally, the bimetallic sheet is in a free state, and the contact is in a closed/disconnected state. When the temperature reaches the operating temperature, the bimetallic sheet is in a free state. The heat generates internal stress and acts quickly, opens/closes the contacts, and cuts/connects the circuit, so as to control the temperature. When the appliance cools down to the reset temperature, the contacts close/open automatically, returning to normal operation.

Application Of The KSD301 Ceramic Bimetal Thermostat

Widely used in: water dispensers, water heaters, sandwich toasters, dishwashers, dryers, disinfection cabinets, microwave ovens, electric coffee pots, electric cookers, refrigerators, air conditioners, glue machines, office equipment, car seat heaters, etc. Electric heating appliances.

Features Of The KSD301 Ceramic Bimetal Thermostat

It has the characteristics of stable performance, high precision, small size, light weight, high reliability, long life, and little worry about radio.

Dimension (mm) Of The KSD301 Ceramic Bimetal Thermostat

Other Products Of The KSD301 Ceramic Bimetal Thermostat

Precautions Of The KSD301 Ceramic Bimetal Thermostat

1. When using contact temperature-sensing installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the temperature-sensing effect, the temperature-sensing surface should be coated with thermal grease or other heat-conducting medium with similar performance.
2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.
3. Do not allow liquid to penetrate into the inside of the temperature controller, do not crack the shell, and do not arbitrarily change the shape of the external terminals.
4. When the product is used in a circuit with a current not greater than 5A, the copper core cross-section should be 0.5-1㎜2 wire connection; when used in a circuit with a current not greater than 10A, the copper core cross-section should be 0.75-1.5㎜2 wire connection connect.
5. The product should be stored in a warehouse where the relative humidity is less than 90% and the ambient temperature is below 40°C, which is ventilated, clean, dry and free of corrosive gases.
Classification of KSD301:
It can be classified according to temperature, material, or installation method.
According to the nature of the action, it can be divided into normally open action and normally closed action.
According to the temperature, it can be divided into:

According to the material, it can be divided into: bakelite body and ceramic body